The Brick solar lamp is powered by solar energy. Using the button on the back of the fixture, you can turn the lamp on and off or select the appropriate operating mode. Perfect for all outdoor applications. Thanks to the lenses used on LED diodes, we obtain a much larger illumination area than in the case of lensless diodes. The lamp has a 3000mAh 3. 7V battery, which needs 5-6 hours to fully charge, and the operating time depends on the selected mode. It will work well in the garden, on the terrace or veranda. The lamp has a twilight and motion sensor and has two operating modes. Press the button once, then the lamp will blink and will be in A mode, another press and blink means switching to B mode, and the next time the lamp will turn off - sensor operation mode - if the battery is above 30%, when motion is detected, the lamp turns on 100%. Motion sensor range: 120 <6m. And then after 20 seconds without motion detection, it enters the economic mode with 30% power and stays on until the next motion is detected. If the battery is below 30%, after motion detection, the lamp turns on at 100%. And then after 20 seconds without motion detected, the lamp will turn off. - continuous lighting mode press the button a second time. After blinking, the lamp is in continuous lighting mode. After dusk, the lamp will turn on automatically and operate at 50% of its power. After 5 hours or when the battery drops below 30%, the lamp will switch to eco mode. When motion is detected, it lights up again at 50% of its power and turns off after 20 seconds.