The BUTTERFLY solar fixture is a modern, intelligent and energy-saving light source with a unique appearance. The lamp has two light sources, front and rear. Thanks to the solar panel placed at the top, the lights are able to convert solar energy into electricity without the need for an external power supply or cable. The lamp is made of safe and damage-resistant material. Lamps of this type are used for external lighting of all entrances, sidewalks and driveways. Lamps from this family have a twilight and motion sensor and have two operating modes. When you press the main button for the first time, the lamp enters A mode, the next press will enter B mode, the next press will turn off the lamp. Motion sensor range: 120 <6m A Mode - When battery power is greater than 30%: The lamp automatically turns on at night and turns to full brightness when motion is detected within <6m, then dims to lower brightness (front light, rear light both on) after 20 seconds of no movement. When the battery level is less than 30%: The lamp automatically turns on at night and changes to full brightness when motion is detected within <6m, then dims to a lower brightness (front light off, only rear light on) after 20 seconds of no movement. B Mode - The lamp automatically turns on at dusk and remains at 50% brightness. After 5 hours or when the battery power is less than 30%, it enters power saving mode, the lamp automatically turns on to 50% brightness when motion is detected within <6m, and then dims to lower brightness (front light off, rear light only) after 20 seconds without movement.